You have no items in your shopping cart.
Sea-Doo GTX Install Guide
Related Products
Custom Registration Numbers
Accessories
$29.95
PWC Registration Numbers TRY OUR NEW DESIGNER 5-7 year high-quality gloss marine vinyl: Set of (2) registration numbers - Approximately 2.25" tall by 15" long OR 20" long by 3.5" tall. Custom sizing available on request - check your state regulations! BRP Sea-Doo endorsed registration number sticker kit. Digitally printed...
State Sticker Block
Accessories
$10.00
Sold Out
Designed to help adhere State-issued registration stickers to "hard-to-stick" low energy surfaces
- Set/Pair of (2) sticker blocks
- 4" wide by 3" tall
- Custom sizing on request +$25
Replacement Sea-Doo logos
Accessories
$25.00
- Pair of (2) Sea-Doo Logos - 22" long by 3.1" tall - Custom sizing available on request Vinyl Logo Specs: BRP Sea-Doo endorsed registration logo sticker kit. Digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy...
Wrap Install Kit
Accessories
$39.95
Install like a pro! Use the same products we use in our shop: Rapid Remover, Rapid Prep, Rapid Tac, Squeegee, X-ACTO Hobby Knife.
*SHIPPING RESTRICTIONS APPLY: USPS Priority Prefered or Rapid Remover will not be included*
Gen4 Factory Decal Upgrade
Ski-Doo REV Gen4 Sled Wrap
$149.95
Ski-Doo Gen4 Factory Decal Upgrade Choose from the best of the best, and update those factory decals with premium quality, Ski-Doo approved aftermarket graphics. Upgrade your factory side-panels, Ski-Doo Logos, Light Pod and Nose accent. Customize any Summit, MXZ, Freeride, Renegade or Backcountry Ski-Doo Gen4 with an economical side panel wrap kit....
Color Approval Chart
$5.00
If the color is critical to your order, please purchase our small print sample proofs for your final approval. We have samples of Orian Gold and Matte available on request.
Metallic Orion Gold Overlaminate
Ski-Doo Gen4 Side Panel Kit
Ski-Doo REV Gen 4 Sled Wrap
$99.95
Compatible Platform and Models - Descent showing as reference Customize any Summit, MXZ, Freeride, Renegade or Backcountry Ski-Doo Gen4 with an economical side panel wrap kit. Replace Ski-Doo Gen4 factory peeling decals with our custom decal panel replacement. Renegade RENEGADE X-RS RENEGADE X RENEGADE ENDURO RENEGADE ADRENALINE RENEGADE SPORT...
Yellow Felt Squeegee
Accessories
$4.95
4"wide
Saves time and money by eliminating the need to pre-mask or wrap squeegee edges with felt or covers.
Protects vinyl from scratching.
Also the felt prevents the creation of air pockets with too stiff of an edge
Each squeegee is 2 7/8 inches tall
SQUEEGEE Package
Accessories
$25.00
RED FELT SOFT SQUEEGEE Softer and more flexible version squeegee with a felt edge. Ideal for 3D applications, deep corrugations and curved applications like pillars and car bumpers. 4" x 2 ¾ WHITE FELT RIGID SQUEEGEE Saves time and money by eliminating the need to pre-mask or wrap squeegee edges with felt...
Custom Colors Before Purchase
$25.00
To allow for a more custom product, we don't send color change or logo addition PROOF’s until the product has been purchased and your change options have been selected during the checkout process. Purchasing Custom Colors Before Purchase gives you full control before committing to a wrap purchase. Customize color options and/or...
GEN4/XM/XS Extra Coverage
Ski-Doo
$75.00
Extra Sled Wrap Coverage
Complement the look of your sled wrap by covering the Tunnels, Seat, Tank and Tunnel Top portion of your snowmobile.
PURCHASE UPGRADES SEPARATELY
Add Tank & Seat Upgrade Additional $75.00
Add Tunnel Upgrade Additional $75.00
Add Tunnel Top Additional $75.00
4" micro-fiber SQUEEGEE
Accessories
$19.95
Micro-fiber squeegee is designed to increase output and efficiency. Squeegee edge glides over graphics and vinyl like no other. It won't heat up or stick, and is rated for up to 400,000 rubs (one time touches). It's also great for all other types of vinyl installation as it absorbs water from...
SCS T-Shirt | BASE
Accessories
$5.00
Custom High quality t-shirtsSizes: small/med med/large lrg/xl
All Sales on clothing are final - NO RETURNS
SCS Team New Era Hat
Accessories
$40.00
Raised embroidered SCS team logo on front. Adjustable snap back and new era flag on side. These hats are the highest quality and are in limited quantities. Get yours now! Sizes: small/med med/large lrg/xl No returns available for these hats.
Chainsaw Pack
Accessories
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Gift Card
Accessories
From $25.00 - $500.00
Shopping for someone else but not sure what to give them? Give them the gift of choice with a SCS Unlimited gift card.
Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.
Gas Can
Accessories
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Knucks
Accessories
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Wolf Badge
Accessories
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
MLB Logo
Accessories
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Tukalak
Accessories
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Badge
Accessories
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Grizzly Adams
Accessories
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Custom Number Plate
Can-Am X3 Graphics
$50.00
Personalize your racing number place with custom graphics that fit your number plate! Actual number plate accessory not included.
Lonestar Racing Number Plate for Maverick Trail, Maverick Sport, Maverick Sport MAX
Lonestar Racing kit NOT INCLUDED
Mountain Script
Accessories
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Scorpion
Accessories
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Install Wheel
Accessories
$95.00
Ideal for installing over the textured plastic found on low-energy parts such as the snowmobile gas tank Roll vinyl over rivets and contoured surfaces, such as door handles and side moldings in seconds with the RollePro. The high-temperature wheel can be used on a variety of surfaces such as brick...
Escape the Ordinary
Accessories
From $3.71 - $4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Registration Number Designer
$29.95
5-7 year high-quality gloss marine vinyl: Set of (2) registration numbers for Port & Starboard included with the item. Add your name and or registration numbers to your Boat, PWC or Personal Watercraft, UTV, SSV or anything desired. Custom number graphics are $35.00. At which point you can work directly with...
