You have no items in your shopping cart.
Ski-Doo REV-XP ETEC Install Key
Related Products
SCS Team New Era Hat
$40.00
Raised embroidered SCS team logo on front. Adjustable snap back and new era flag on side. These hats are the highest quality and are in limited quantities. Get yours now! Sizes: small/med med/large lrg/xl No returns available for these hats.
SQUEEGEE Package
RED FELT SOFT SQUEEGEE Softer and more flexible version squeegee with a felt edge. Ideal for 3D applications, deep corrugations and curved applications like pillars and car bumpers. 4" x 2 ¾ WHITE FELT RIGID SQUEEGEE Saves time and money by eliminating the need to pre-mask or wrap squeegee edges with felt...
4" micro-fiber SQUEEGEE
$19.95
Micro-fiber squeegee is designed to increase output and efficiency. Squeegee edge glides over graphics and vinyl like no other. It won't heat up or stick, and is rated for up to 400,000 rubs (one time touches). It's also great for all other types of vinyl installation as it absorbs water from...
Yellow Felt Squeegee
$4.95
4"wide
Saves time and money by eliminating the need to pre-mask or wrap squeegee edges with felt or covers.
Protects vinyl from scratching.
Also the felt prevents the creation of air pockets with too stiff of an edge
Each squeegee is 2 7/8 inches tall
Wrap Install Kit
$29.95
Install like a pro! Use the same products we use in our shop: Rapid Remover, Rapid Prep, Rapid Tac, Squeegee, X-ACTO Hobby Knife.
*SHIPPING RESTRICTIONS APPLY: USPS Priority Prefered and will ship separate from your decals*
Gift Card
From $18.75 - $500.00
Shopping for someone else but not sure what to give them? Give them the gift of choice with a SCS Unlimited gift card.
Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.
Registration Numbers
Sea-Doo Spark
$25.00
5-7 year high quality gloss marine vinyl: Set of (2) registration numbers - Approximately 2.25" tall by 15" long OR 20" long by 3.5" tall. Custom sizing available on request - check your state regulations! BRP Sea-Doo endorsed registration number sticker kit. Digitally printed on engineering grade high-tensile vinyl with aggressive,...
Replacement Sea-Doo logos
Sea-Doo Spark
$25.00
Pair of (2) Sea-Doo Logos - Approximately 25" long by 3.5" tall. Custom sizing available on request. Vinyl Logo Specs: BRP Sea-Doo endorsed registration logo sticker kit. Digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces....
State Sticker Block
Sea-Doo Spark
$10.00
Set/Pair of (2) sticker blocks
Designed to help adhere State issued registration stickers to "hard-to-stick" low energy surfaces.
GEN4/XM/XS Extra Coverage
$50.00
Additional Sled Wrap Coverage
Complement the look of your sled wrap by covering the Tunnels, Seat, Tank and Tunnel Top portion of your snowmobile.
PURCHASE UPGRADES SEPARATELY
Add Tank & Seat Upgrade Additional $50.00
Add Tunnel Upgrade Additional $50.00
Add Tunnel Top Additional $50.00
Custom Colors Before Purchase
$25.00
To allow for a more custom product, we don't send color change or logo addition PROOF’s until the product has been purchased and your change options have been selected during the checkout process. Purchasing Custom Colors Before Purchase gives you full control before committing to a wrap purchase. Customize color options and/or...
Color Approval Chart
$5.00
If color is critical to your job, please purchase our small print sample proofs for your final approval.
Escape the Ordinary
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Grizzly Adams
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Badge
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Scorpion
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Gas Can
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Tukalak
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Knucks
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
MLB Logo
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Wolf Badge
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Chainsaw Pack
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
Mountain Script
$4.95
SCS Stickers are printed using our digitally printed on engineering grade high-tensile vinyl with aggressive, permanent pressure-sensitive adhesive. The special adhesive system is designed to adhere to “hard-to-stick” and low energy surfaces. Sizes vary but range from 5" to 3". Blue trim line will not print, indicates where the machine...
